4 min read

Load shedding and refrigeration: protecting stock and compressors

What repeated power interruptions do to fridges, cold rooms and ice machines, and the practical measures that protect both equipment and stock.

The compressor takes the strain

A compressor is designed to start against a pressure difference. When power returns after an interruption, every refrigeration unit in a building tries to restart at the same moment, often against high head pressure. That is the hardest start a compressor will ever make, and repeated hard starts shorten its life.

Modern controllers can be set with a restart delay, so units come back in a staggered sequence rather than all at once. On older equipment a delay timer achieves the same result. It is one of the cheapest reliability measures available.

Stock protection is mostly about doors

A closed, well-sealed cabinet holds temperature for a surprising length of time. A cabinet opened repeatedly during an outage does not. The practical rules are simple: keep doors shut, add nothing warm, and resist the urge to check by opening the door.

For cold rooms and freezer rooms, a sealed door, intact strip curtain and a room that is not over-filled will hold temperature far longer than a room with a damaged seal and stock piled against the evaporator.

Surges and returning supply

Power returning after an outage can arrive with a surge that damages controllers, inverter boards and sensors. Surge protection at the equipment, not only at the main board, is worth specifying on expensive refrigeration and on any unit with electronic controls.

After a long outage it is also worth checking that everything actually restarted. A unit that tripped and stayed off is easy to miss in a busy kitchen until stock is lost.

Keep reading

Other guides

Enquire

Ask about your own property

If this guide raised a question about your system, send the details and we will answer it directly.

We use your details only to respond to this enquiry. No marketing lists.

Next step

Tell us what the system is doing. We will tell you what it needs.

Send an enquiry with the property type, the service and a short description of the fault. We reply with the next practical step, and we do not use pressure or invented urgency.