5 min read

Sizing an air conditioner for an inland Cape home

Why floor-area rules fail in Bellville and Stellenberg, and what orientation, glazing, ceiling height and occupancy actually do to the cooling load.

Glass and orientation carry the load

A west-facing living room with full-height windows can need substantially more capacity than a north-facing bedroom of the same size. The afternoon sun lands on that glass and the room stores the heat in its walls and floor, which is why it stays warm long after the sun has moved off.

A floor-area rule ignores all of it. Applied honestly, it usually sizes the room for an average day and leaves the owner disappointed in February.

Oversizing is a real mistake

An oversized unit cools the air quickly and then cycles off, removing less moisture than the room needs. The result feels cold and clammy, the compressor starts and stops constantly, and the equipment wears faster than a correctly sized unit running steadily.

Correct capacity with sensible zoning beats raw kilowatts every time, particularly in open-plan living areas.

What the survey should establish

Orientation, glass area, shading, ceiling height and insulation are the physical inputs. Occupancy and how the room is used are the practical ones: a home office with two people and a server runs differently from a guest bedroom.

Add the electrical supply and the plant position to that list. A perfect capacity calculation on a board with no spare way is still an unfinished job.

Keep reading

Other guides

Enquire

Ask about your own property

If this guide raised a question about your system, send the details and we will answer it directly.

We use your details only to respond to this enquiry. No marketing lists.

Next step

Tell us what the system is doing. We will tell you what it needs.

Send an enquiry with the property type, the service and a short description of the fault. We reply with the next practical step, and we do not use pressure or invented urgency.